Aposonic A-S0802R18 User Manual download pdf (Page 15)

- 15 -

3. Installations

The installations described below should be made by qualified service personnel or

system installers.

3.1 Basic Connections

Please refer to the following diagram for the connections.

Please make sure to set the NTSC/PAL Selector Switch on the main board

according to the local TV system for the system to work correctly.

 Cameras

Connect the camera video input connectors to the video outputs from system

cameras or other composite video sources via coaxial cables. The internal 75Ω

termination is always ON.

 Main monitor

Connect the main monitor output connector (BNC) to a surveillance TV monitor,

or connect the VGA output connector to a VGA monitor. The TV/VGA

monitor displays selected live or recorded cameras in any available split window

format. Please note there won’t be video signal for MAIN OUT BNC

connector if VGA is connected.

 Hard disk drive

Make sure to install one SATA hard disk (Max. storage size 2TB) inside the

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 115 116

No comments

Aposonic A-S0802R18 User Manual Page 15