DVR User Manual For H.264 8/16-channel digital video recorder All rights reserved
DVR User Manual 4 2 Hardware Installation Notice: Check the unit and the accessories after getting the DVR. Please don‟t power up the unit till the p
DVR User Manual 94 PC Module Parameters CPU Intel Core(TM)2 Duo CPU E4600 Motherboard G31/P31 chip HDD 80G RAM 1GB VGA GMA3100/NVIDIA GeForce 8400/
DVR User Manual 95 Q15. How to play the backup file? a. Insert your USB device where the backup files are saved in the USB port of PC. If your files
DVR User Manual 96 Appendix B Calculate Recording Capacity Users can calculate the required size of hard disk according to the total recording dura
DVR User Manual 97 Appendix C Compatible Devices 1. Compatible USB drive after test. Brand Capacity SSK 512MB, 1G, 2GB Netac 4GB Kingston 2G
DVR User Manual 98 Brand Capacity Seagate Barracuda 80G/160G/250G/320G /1.5T/2TB Seagate SV35.3 1T Seagate Pipeline HD.2 500G Maxtor Diamondmax
DVR User Manual 99 Appendix D 8-CH Specifications Compression format H.264 Main Profile Video output Composite:1.0V p-p/75Ω BNC×2, VGAX1 Video Inpu
DVR User Manual 100 Appendix E 16-CH Specifications Compression format H.264 Main Profile Video output Composite:1.0V p-p/75Ω BNC×2, VGAX1 Video Inp
DVR User Manual 5 2.1.2 Install DVD Writer Notice: 1. The writers must be the compatible devices we recommend. Please refer to “Appendix C Compatible
DVR User Manual 6 Item Type Name Description 2 Compound button MENU/+ 1. Enter menu in live 2. Increase the value in setup BACKUP/- 1. Decreas
DVR User Manual 7 Fig 2.5 Rear Panel for 8-ch Item Name Description 1 Power switch Turn on/off the power supply. 2 DC 12V Power input 3 P/Z Connect t
DVR User Manual 8 Fig 2.6 Rear Panel for 16-ch Item Name Description 1 Power switch Turn on/off the power supply. 2 DC 12V Power input 3 P/Z Connect
DVR User Manual 9 2.4 Remote Controller It uses two AAA size batteries. Open the battery cover of the Remote Controller. Place batteries. Plea
DVR User Manual 10 Item Name Function 9 Direction Button Move cursor in setup or pan/tilt PTZ 10 +/- Button To increase or decrease the value in setup
DVR User Manual 11 You can check the device ID of a DVR from System SetupBasicDevice ID. You can also set multiple DVRs with the same device ID h
DVR User Manual 12 Fig 2.7 Digital Numbers and Letters Input Window It supports mouse drag. For e.g. setting up motion detection area, click cus
DVR User Manual 13 3 Basic Function Instruction 3.1 Startup & Shutdown Please make sure all the connections are done properly before you power o
DVR User Manual CAUTION Please read this user manual carefully to ensure that you can use the device correctly and safely We do not warrant all
DVR User Manual 14 Step3: Disconnect the power 3.2 Login User can login or log off the DVR system. Once logged off the user cannot do any other oper
DVR User Manual 15 Fig 3-3 Live Playback
DVR User Manual 16 4 Main Menu Setup Guide Right click or press ESC button on the front panel to display the menu toolbar on the bottom of the scree
DVR User Manual 17 Fig 4-2 System Setup 4.1 Basic Configuration Basic configuration includes three sub menus: system, date & time and DST. 4
DVR User Manual 18 Max Online Users: To set the maximum number of concurrent user logins in the DVR. Show wizard: If selected, the GUI would launch th
DVR User Manual 19 4.2 Live Configuration Live configuration includes four submenus: live, main monitor, spot and mask. 4.2.1 Live In this interfa
DVR User Manual 20 4.2.2 Main Monitor Step1: Enter into MenuSetupLiveMain Monitor tab. Refer to Fig 4-8: Step2: Select split mode: 1×1、2×2、2×3、3×3
DVR User Manual 21 setting. Fig 4-10 Live Configuration-Mask Setup Mask Area
DVR User Manual 22 4.3.1 Enable Step1: Enter into MenuSetupRecordEnable tab. Refer to Fig 4-11: Fig 4-11 Record Configuration-Enable Step2: Check
DVR User Manual 23 Fig 4-12 Record Configuration-Record Bitrate 4.3.3 Time Step1: Enter into MenuSetupRecordTime interface. Refer to Fig 4-13: P
DVR User Manual Table of Contents 1 Introduction ...
DVR User Manual 24 Stamp:This provides an option to enable or disable the Camera Name and the Time stamp on the video. You can also choose a position
DVR User Manual 25 4.3.6 Snap In this interface, user can set up Resolution, quality, snap interval, snap number. 4.4 Schedule Configuration Schedu
DVR User Manual 26 4.4.2 Motion This tab allows to setup schedule for motion based recording. Step1: Enter into MenuSetupScheduleMotion tab.
DVR User Manual 27 4.5 Alarm Configuration Alarm configuration includes five sub menus: sensor, motion, video loss, other alarm and alarm out. 4.5.1
DVR User Manual 28 Step 6: Enter into alarm tab to select the options to handle alarm. Buzzer: If selected, the local inbuilt buzzer would be activate
DVR User Manual 29 Step1: Enter into MenuSetupAlarmMotion tab. Refer to Fig 4-23: Step2: Enable motion alarm, set alarm hold time which refers to t
DVR User Manual 30 the trigger, you will not see the result of motion based alarm if no schedule is added. If you have set the schedule for senor base
DVR User Manual 31 Alarm out includes three sub menus: alarm out, schedule and buzzer To setup alarm out: Step 1: Enter into MenuSetupAlarm out ta
DVR User Manual 32 http://192.168.0.25:82 in IE browser. Server po
DVR User Manual 33 4.6.3 Email Step 1: Enter into MenuSetupNetworkEmail tab. Refer to Fig 4-31: SMTP Server/Port: The name and port number of SM
DVR User Manual 4.2.1 Live ...
DVR User Manual 34 4.6.5 Other Settings If your DVR is setup to use PPPoE as its default network connection, you may setup DDNS to be used in connec
DVR User Manual 35 Step 3: Click “Add to cart”. Then Dynamic DNS Hosts dialog box will be displayed. Step 4: Create user account. For example, the us
DVR User Manual 36 Connect DVR via network: Step 1: Enter into Main menuNetworkother settings, checkmark DDNS, select “Dyndns” at the DDNS Sever
DVR User Manual 37 Fig 4-34 User Management Configuration Fig 4-35 Add-General Step 5: S
DVR User Manual 38 4.8 P.T.Z Configuration P.T.Z configuration includes two submenus: serial port and advanced settings. Serial port settings are as
DVR User Manual 39 Advance settings are as follows: Step 1: Enter into MenuSetup P.T.Z Advanced tab. Refer to Fig 4-38: Step 2: In the Advanced t
DVR User Manual 40 Click Add button to add cruise line in the list box (max 8 cruise line can be added); select a cruise line and click Setup butto
DVR User Manual 41 4.9 Advanced Advanced configuration includes three submenus: Reset, Import/Export and Block/Allow list. 4.9.1 Reset This would re
DVR User Manual 42 5 Search,Playback & Backup Search configuration includes four submenus: time search, event search, file management and image.
DVR User Manual 43 Step4: Select the channel display mode and click button to play record. Use the playback toolbar to control the playback. Play
DVR User Manual 4.7 User Management Configuration ...
DVR User Manual 44 Fig 5-2 Search Configuration-Event Search Step 2: Select date and channels on the right hand side. A data with highlighted borderl
DVR User Manual 45 Fig 5-3 Search Configuration-File Management Lock: Select a file and click Lock button to lock this file. Once locked, the file ca
DVR User Manual 46 Please refer to 4.5 Alarm Configuration for details. 5.5 Backup This unit supports backup by built-in SATA DVD Writer or USB
DVR User Manual 47 6 Manage DVR 6.1 Check System Information Check system information includes six submenus: system, event, log, network, online us
DVR User Manual 48 Disconnect: Disconnect the online users to access DVR. If this function is used by the admin, the particular PC will not be able to
DVR User Manual 49 6.4 Upgrade The DVR can be upgraded by using USB flash drive. Get the upgrading software from your vendor when there is
DVR User Manual 50 7 Remote Surveillance 7.1 IE Remote Surveillance In order to view the DVR from a network it must be connected to a LAN/WAN or int
DVR User Manual 51 Step 3: Open IE browser, input IP address, or dynamic domain name and enter. If HTTP port is not 80, add the port number after IP a
DVR User Manual 52 Step 4: The following setting steps are as the same as Step3 and Step4 in Point 1. 7.2 Remote Surveillance through Apple PC Not
DVR User Manual 53 7.2.1 On LAN Step 1: After starting Apple computer, click Apple icon. The following window will pop up. Please se
DVR User Manual 7.1.2 On WAN ...
DVR User Manual 54 Step 3: After acquiring the IP address, Subnet Mask and so on, please enter into the DVR‟s Main MenuSetupNetwork interface
DVR User Manual 55 button,the following window will pop up: Input the name and password of Apple PC and then click “OK” to install this Activ
DVR User Manual 56 7.3 Remote Preview Fig 7-2 Remote Live Preview Symbol and function Definitions: ① Channel indicator ② Screen display mode ③ Vol
DVR User Manual 57 Click the icon beside the screen display mode, channel select dialog will appear as below: Take 8-channel view for examp
DVR User Manual 58 and zoom, focus and set the presets, etc. Buttons definition: Buttons Description means the dome rotate up. means the dome rota
DVR User Manual 59 Fig 7-4 Right Key Sub Menu Stream: This DVR supports master stream and sub stream. Master stream has higher frame rate, max 25 fps
DVR User Manual 60 Fig 7-5 Play Record File Interface This DVR supports remote time search, event search and file management. By Time Search: Step
DVR User Manual 61 Fig 7-6 Time Search Interface Step2: The highlight date in the area② indicates recorded data. Select the date in the area ② and re
DVR User Manual 62 Fig 7-7 Playback by Event Search By Event Search: Step1: Enter into SearchEvent Search. Refer to Fig 7-8:
DVR User Manual 63 Fig 7-8 Event Search Interface Step 2: Click the highlight date and select record channels. Step 3: Checkmark the event type: moti
DVR User Manual 1 1 Introduction 1.1 DVR Introduction This model DVR (Digital Video Recorder) is designed especially for CCTV system. It
DVR User Manual 64 Fig 7-9 File Management Interface Lock: Select certain file item in the file list box and then click “Lock” button to lock this fi
DVR User Manual 65 Fig 7-10 Remote Backup Interface Step1: Select channels, set the start and end time and then click “search‟ button to display the
DVR User Manual 66 Fig 7-11 Remote System Configuration The sub menu list and the options in every menu are similar to that of the DVR. Please refer
DVR User Manual 67 of the DVR. Please refer to Chapter 6 System information for more details. Fig 7-12 Remote Information Search Note: There may
DVR User Manual 68 8 Mobile Surveillance This DVR supports mobile surveillance by phones with Windows mobile, symbian, android, Iphone and Blackberr
DVR User Manual 69 to log on the server. Refer below picture in the left: Step6:Camera 1 is the default channel after login. Change the channel in rol
DVR User Manual 70 Step2:Input the DVR server‟s IP address in a new-built bookmark. Click this bookmark to connect to the DVR. Refer picture in the le
DVR User Manual 71 Step9:Enter Live View, it will connect the server and display pictures. Refer picture in the left: Notice: User name and password
DVR User Manual 72 Step 3: Click Superlive-pro, enter into “introduce” interface and then click “FREE”, it will change into “INSTALL”
DVR User Manual 73 Note: If it is the first time for user to operate, please enter user ID; if there is no Store account, user needs to
DVR User Manual 2 RECORD & PLAYBACK Record modes: Manual, Schedule, Motion detection and Sensor alarm recording Support recycle after HDD fu
DVR User Manual 74 Step 3: Enable “search” function to search “Superlive-Pro” Step 4: Click “free application” button
DVR User Manual 75 Enter server‟s IP address (or domain name), user name and password Click “Remember server” to save the setting; click button
DVR User Manual 76 Upward rotates the PTZ Downward rotates the PTZ Leftward rotates the PTZ Rightward rotates the PTZ Stop rotating the PTZ
DVR User Manual 77 4. Playback Click icon to enter into the playback interface. Then click „Search‟ button, select the time and channel to p
DVR User Manual 78 5. Server list Click button to enter into server list interface. You can click icon to add a server list. After you add the
DVR User Manual 79 7. Information View Interface Click icon to enter into information view interface. You can check the information of system,
DVR User Manual 80 Step 3: press “Install” button Step 4: click “OK” button Step
DVR User Manual 81 Enter into server‟s IP address (or domain name), user‟s ID and password. Click “Remember server” to save the setting; click but
DVR User Manual 82 Live view Image view Stop playing Single channel display Screen mode Four channels display Snap PTZ Talk Record Liv
DVR User Manual 83 Record playback Click Playback icon in the Main Menu interface to enter into the playback interface. First, choose channel
DVR User Manual 3 Support event log recording and checking, events unlimited NETWORK Support TCP/IP, DHCP, PPPoE, DDNS protocol Support IE br
DVR User Manual 84 Information view 8.5 By Phones with Blackberry OS Alarm setting If Audio alarm is enabled, when Video Loss/S
DVR User Manual 85 1. Open the browser of BlackBerry phone and enter sever address 2. Click “Supercam” to link 3. Click “Download” button o
DVR User Manual 86 Note:When user used the Supercam software in mobile phone with touch screen, there will be compatible problem. Sol
DVR User Manual 87 Live view Note: User can click Return button on the Blackberry phone to return the previous interface.
DVR User Manual 88 Mark 1 Current viewing channel Mark 2 Channel status Switch channels PTZ, click to switch to Fig 2 interface Snap Full scre
DVR User Manual 89 Software configuration Information view
DVR User Manual 90 Appendix A FAQ Q1. Why the DVR doesn’t turn on even after connecting to the power? a. The power adapter could have gone bad. Ple
DVR User Manual 91 c. The HDD could have gone bad. Change a new one. Q6. Cannot record a. Make sure the HDD was formatted prior to use. b. Maybe the
DVR User Manual 92 ② select Security------Custom Level….Refer to Fig 8-1 ③ Enable all the sub options under “ActiveX controls and plug-ins”. Refer t
DVR User Manual 93 halt. Check with a good known HDD or try formatting the existing HDD. Q10: How to input password and numbers in the interface? Cli
Comments to this Manuals