Aposonic A-S0802R18 User Manual download pdf (Page 100)

- 100 -

the same as the IP address (for Static IP) or URL (for PPPoE) in Network Setup

for the (DVR) device.

 Control Port – the control port for the (DVR) device. The default value is 67.

 Data Port – the data port for the (DVR) device. The default value is 68.

 Video Stream – “Record” – live video same as recording stream, or “Extra” –

extra network stream (set as in Sec. 6.10.3 Advanced Network Setup) if dual

streaming is supported for the (DVR) device. The default value is “Record”.

 User Name – the login user name for the (DVR) device. It must be in the list

in Password Setup for the (DVR) device. Please note that different levels of

users have different available operations.

 Password – the corresponding password for the login user name for the (DVR)

device.

 Auto Connection – whether the user wants to connect automatically to this

(DVR) device.

 Connected – whether this PC is connected with the (DVR) device now. If a

DVR is connected, the user may select it, and click on “Reboot” to reboot it.

The other properties in the dialog are similar to those described in Chapter 6. Please

refer to Chapter 6 for the detailed descriptions. Besides, the user can

download/upload the configurations from/to the connected DVR, or open/save the

configurations from/to the designated directory.

Click on this icon to call up remote Software Upgrade dialog. The current software

version of the DVR(s) will be shown in the “status” field. Please select the DVR

device and upgrade file in the PC, and then click on Start button to start the software

upgrade process. The Upgrade status will be updated according to the progress.

When the upgrade file is uploading, the user may click on Stop/Close button to stop

the upgrade process.

Note : There must be at least one formatted HDD in the DVR for the remote

upgrade to succeed. After the software in the DVR is upgraded, the DVR will

restart immediately and the PC will be disconnected from the DVR. Please do

step 7 in Before Logging On, and then re-run the I.E. to connect to the DVR

again.

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 115 116

No comments

Aposonic A-S0802R18 User Manual Page 100